Skip to Content

 Select the Manufacturing Service you Need

Custom Made Parts

  • Purpose: Unique, made-to-order part.
  • Quantity: Typically 1–10 units.
  • Focus: Tailored to specific customer need or application.
  • Limits on Part Size:   850 × 700 × 500 mm ≈  33 × 28 × 20 inch  ;  up to 500 kg  ≈ 1100 lbs.
  • Examples:  Replacement parts, automation components, jigs, fixtures, mold inserts, housings, brackets, electrodes, manifolds, reverse-engineered parts etc.


Need a Quote?

Fill out the form below and upload your files – our team will review your request and get back to you with a custom offer within 24 hours.

Confidentiality: 🔒 All uploaded files and form fills are handled securely and treated as strictly confidential.

Please enter your full name.
Enter your professional email address so we can respond promptly. 
Provide your company's official name.
Upload everything related to your part: 3D model, 2D drawing, ballooned drawing, specs, packaging files – the more info, the better we can meet your needs. 
Enter the name of the part or internal reference (e.g., Cover Plate A12).
Specify if the part is visual, functional, structural, or safety-critical. This helps us assess inspection requirements. 
Select the industry this part will be used in. This helps us apply relevant standards and materials. 
Enter the required number of parts. 
Select the desired manufacturing technology.
Common materials we keep in stock and can be machined quickly. 
If your required material is not listed, write it here (e.g., Inconel 718, Titanium Grade 5). 
Choose if you need a material certificate (e.g., EN 10204 3.1) for traceability or compliance. 
Select tolerances based on part function. 
Does your part require any sharp edges? Unless otherwise specified, ISO 13715:2017 will be applied to remove sharp edges. 
Select a lowest fit type if precise tolerances between shafts and holes are required (e.g., H7/g6).
Enter the total number of threaded holes (metric or imperial). This is the combined count of all internal threads on the part. 
Specify the number of dowel pin holes required for alignment or positioning. 
Enter the number of countersinks needed (e.g., for screw heads or flush features).
Choose the desired surface finish.

Select a surface treatment if needed (e.g., anodizing, hardening up to 65 HRC, powder coating).

If a specific coating or finish is not listed above, describe it here.
Indicate if any markings (e.g., part numbers, logos, text) are required on the part.
Unless othervise specified ISO 2859-1 sampling inspection will be used.
Select your desired packaging method.
Select your preferred shipping method. We use tracked DHL international services. Delivery times may vary by region. 
Add any additional instructions, notes, or requirements related to this order. 
REQU​EST QUOTE

Prototypes

  • Purpose: Functional or visual test part.
  • Quantity: Usually 1 piece or a few units.
  • Focus: Speed, design validation, mechanical testing or concept testing.
  • Limits on Part Size:   850 × 700 × 500 mm ≈  33 × 28 × 20 inch  ;  up to 500 kg  ≈ 1100 lbs.
  • Examples:  Sensor housings, test brackets, drone arms, cooling blocks, connector mounts, gear samples, optical holders, ergonomic grips etc.


Need a Quote?

Fill out the form below and upload your files – our team will review your request and get back to you with a custom offer within 24 hours.

Confidentiality: 🔒 All uploaded files and form fills are handled securely and treated as strictly confidential.

Please enter your full name.
Enter your professional email address so we can respond promptly. 
Provide your company's official name.
Upload everything related to your part: 3D model, 2D drawing, ballooned drawing, specs, packaging files – the more info, the better we can meet your needs. 
Enter the name of the part or internal reference (e.g., Cover Plate A12).
Specify if the part is visual, functional, structural, or safety-critical. This helps us assess inspection requirements. 
Select the industry this part will be used in. This helps us apply relevant standards and materials. 
Enter the required number of parts. 
Select the desired manufacturing technology.
Common materials we keep in stock and can be machined quickly. 
If your required material is not listed, write it here (e.g., Inconel 718, Titanium Grade 5). 
Choose if you need a material certificate (e.g., EN 10204 3.1) for traceability or compliance. 
Select tolerances based on part function. 
Does your part require any sharp edges? Unless otherwise specified, ISO 13715:2017 will be applied to remove sharp edges. 
Select a lowest fit type if precise tolerances between shafts and holes are required (e.g., H7/g6).
Enter the total number of threaded holes (metric or imperial). This is the combined count of all internal threads on the part. 
Specify the number of dowel pin holes required for alignment or positioning. 
Enter the number of countersinks needed (e.g., for screw heads or flush features).
Choose the desired surface finish.

Select a surface treatment if needed (e.g., anodizing, hardening up to 65 HRC, powder coating).

If a specific coating or finish is not listed above, describe it here.
Indicate if any markings (e.g., part numbers, logos, text) are required on the part.
Unless othervise specified ISO 2859-1 sampling inspection will be used.
Select your desired packaging method.
Select your preferred shipping method. We use tracked DHL international services. Delivery times may vary by region. 
Add any additional instructions, notes, or requirements related to this order. 
REQU​EST QUOTE

Serial Batch Production

  • Purpose: Repeated manufacturing of the same part.
  • Quantity: 10 to 10,000+ pieces per month (batch).
  • Focus: Efficiency, repeatability, cost optimization.
  • Limits on Part Size:   850 × 700 × 500 mm ≈  33 × 28 × 20 inch  ;  up to 500 kg  ≈ 1100 lbs. 
  • Examples:  Valve bodies, connector flanges, heat sinks, tool holders, mounting plates, threaded spacers, mechanical covers, sensor brackets etc. 


Need a Quote?

Fill out the form below and upload your files – our team will review your request and get back to you with a custom offer within 24 hours.

Confidentiality: 🔒 All uploaded files and form fills are handled securely and treated as strictly confidential.

Please enter your full name.
Enter your professional email address so we can respond promptly. 
Provide your company's official name.
Upload everything related to your part: 3D model, 2D drawing, ballooned drawing, specs, packaging files – the more info, the better we can meet your needs. 
Enter the name of the part or internal reference (e.g., Cover Plate A12).
Specify if the part is visual, functional, structural, or safety-critical. This helps us assess inspection requirements. 
Select the industry this part will be used in. This helps us apply relevant standards and materials. 
Enter the required number of parts that will be in one batch of production. 
Select the desired manufacturing technology.
Common materials we keep in stock and can be machined quickly. 
If your required material is not listed, write it here (e.g., Inconel 718, Titanium Grade 5). 
Choose if you need a material certificate (e.g., EN 10204 3.1) for traceability or compliance. 
Select tolerances based on part function. 
Does your part require any sharp edges? Unless otherwise specified, ISO 13715:2017 will be applied to remove sharp edges. 
Select a lowest fit type if precise tolerances between shafts and holes are required (e.g., H7/g6).
Enter the total number of threaded holes (metric or imperial). This is the combined count of all internal threads on the part. 
Specify the number of dowel pin holes required for alignment or positioning. 
Enter the number of countersinks needed (e.g., for screw heads or flush features).
Choose the desired surface finish.

Select a surface treatment if needed (e.g., anodizing, hardening up to 65 HRC, powder coating).

If a specific coating or finish is not listed above, describe it here.
Indicate if any markings (e.g., part numbers, logos, text) are required on the part.
Unless othervise specified ISO 2859-1 sampling inspection will be used.
Select your desired packaging method.
Select your preferred shipping method. We use tracked DHL international services. Delivery times may vary by region. 
Add any additional instructions, notes, or requirements related to this order. 
REQU​EST QUOTE

Toolmaking

  • Purpose: Manufacturing of tools used to make other parts.
  • Quantity: Typically 1–3 tools per project, with occasional repeats during the product lifecycle.
  • Focus: High precision, long-term durability, specific materials (e.g., tool steels)
  • Limits on Project Size:   1000 × 1000 × 600 mm ≈  39 × 39 × 24 inch  ;  up to 1000 kg  ≈ 2200 lbs. 
  • Examples:  Mold cavities, die inserts, EDM electrodes, trimming tools, CNC fixtures, CMM fixtures, measuring tools, test blocks, custom jigs, punch tools, form tools etc.


Need a Quote?

Fill out the form below and upload your files – our team will review your request and get back to you with a custom offer within 24 hours.

Confidentiality: 🔒 All uploaded files and form fills are handled securely and treated as strictly confidential.

Please enter your full name.
Enter your professional email address so we can respond promptly. 
Provide your company's official name.
Upload everything related to your part: 3D model, 2D drawing, ballooned drawing, specs, packaging files – the more info, the better we can meet your needs. 
Enter the name of the part or internal reference (e.g., Cover Plate A12).
Specify if the part is visual, functional, structural, or safety-critical. This helps us assess inspection requirements. 
Select the industry this part will be used in. This helps us apply relevant standards and materials. 
Enter how many parts are produced per cycle in the tool.
Describe the tools or fixtures required to transition from pre-production to production, based on the complexity of your project. 
Select if you need us to design the 3D tool or if you will provide the finished design.
Let us know if your project requires any numerical simulations. This helps us better support your design and validation process.
Select your desired packaging method.
Select your preferred shipping method. We use tracked DHL international services. Delivery times may vary by region. 
Add any additional instructions, notes, or requirements related to this order. 
REQU​EST QUOTE